- 您现在的位置：买卖IC网 > Sheet目录872 > PC625 (EnerSys)BATTERY ODYSSEY SLA 12V
ODYSSEY battery technology comparison
?
?
ODYSSEY ?
BATTERIES
CONVENTIONAL
BATTERIES
DESIGN LIFE
SERVICE LIFE
ELECTROLYTE
8-12 years (Float)
@ 25? C (77? F)
3 to 10 years
Drycell (“starved
5 years
1 to 5 years
Most are acid
flooded (causing
Better warranty – Limited 2-, 3- and 4-year full
replacement warranty – not pro rata.
Longer service life – 3-10 years of service life.
Longer cycle life – 70% longer cycle life compared to
conventional deep cycle batteries – up to 400 cycles at
80% depth of discharge.
Longer shelf life – Can be stored on open circuit (nothing
connected to the terminals) without the need for
recharging up to 2 years or down to 12.00V, whichever
occurs first.
STORAGE LIFE
SHIPPING
END OF LIFE
electrolyte”) no external
leakage or corrosion
2 years before needing
charge @ 25?C (77?F)
Air transportable;
US Department
of Transportation
classified non-spillable
(less expensive)
Battery slowly loses
power at end of life; no
catastrophic failure
acid burns and
spills); some wet
sealed or “gelled”
6-12 weeks before
needing charge
Ground transport;
classified as
hazardous material
(more expensive)
Immediate and
catastrophic loss
of power (can leave
you stranded)
Faster recharge – The highest recharge efficiency of any
sealed lead battery on the market –100% recharge in
4-6 hours.
Mounting flexibility – Non-spillable design – can be
mounted on any side in any position except inverted.
Vibration resistance – Design protects against high
impact shock and vibration – a common cause of
premature battery failure.
Extreme temperature tolerant – Operating temperatures
from -40°C (-40°F) to 80°C (176oF).*
Totally maintenance free – No need to add water, ever!
Drycell design with resealable venting system.
Improved safety – US Department of Transportation
classified as a ‘non-spillable’ battery. No acid spills,
no escaping gases.
Alloy coated brass
terminals for corrosion-
free connection ?
Compressed AGM plate
separators for extreme
vibration resistance
*Not all models are capable of 80°C (176°F)
ODYSSEY ? batteries vs. spiral-wound
designs: 15% more plate surface area!
Unsused battery space
Bonded intercell connections to resist
vibration and eliminate internal sparking
? PC1220 and PC1350 do not have brass terminals. Please see table for details.
99.99% pure lead
plates – more plates
equals more power
1-800-538-3627
www.odysseybattery.com
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
PCF0J470MCL1GS
CAP ALUM 47UF 6.3V 20% SMD
PCG1C271MCL1GS
CAP ALUM 270UF 16V 20% SMD
PCG1C821MCL1GS
CAP ALUM 820UF 16V 20% SMD
PCJ0G182MCL9GS
CAP ALUM 1800UF 4V 20% SMD
PCK0J821MCO1GS
CAP ALUM 820UF 6.3V 20% SMD
PCMC053T-1R0MN
COIL 1.0 UH POWER CHOKE 20% SMD
PCMC135T-R62MF
COIL .62 UH POWER CHOKE 20% SMD
PCS0J221MCL1GS
CAP ALUM 220UF 6.3V 20% SMD
相关代理商/技术参数
PC62P
功能描述:PCB COPPER CLAD POS 6 X 9"2 SIDE RoHS:是 类别:原型开发产品 >> 原型开发板 - 未穿孔 系列:- 标准包装:5 系列:500 原型板类型:包铜，无涂层 尺寸/尺寸:36.00" x 24.00"（914.4mm x 609.6mm） 板厚度:0.063"（1.60mm）1/16" 材质:双面包铜 FR4，1 盎斯
PC62P-T
功能描述:PCB COPPER CLAD POS 12X12"2 SIDE RoHS:是 类别:原型开发产品 >> 原型开发板 - 未穿孔 系列:- 标准包装:5 系列:500 原型板类型:包铜，无涂层 尺寸/尺寸:36.00" x 24.00"（914.4mm x 609.6mm） 板厚度:0.063"（1.60mm）1/16" 材质:双面包铜 FR4，1 盎斯
PC62-T
功能描述:PCB COPPER CLAD 12 X 12" 2 SIDE RoHS:是 类别:原型开发产品 >> 原型开发板 - 未穿孔 系列:- 标准包装:5 系列:500 原型板类型:包铜，无涂层 尺寸/尺寸:36.00" x 24.00"（914.4mm x 609.6mm） 板厚度:0.063"（1.60mm）1/16" 材质:双面包铜 FR4，1 盎斯
PC63
功能描述:PCB COPPER CLAD 12 X 18" 2 SIDE RoHS:是 类别:原型开发产品 >> 原型开发板 - 未穿孔 系列:- 标准包装:5 系列:500 原型板类型:包铜，无涂层 尺寸/尺寸:36.00" x 24.00"（914.4mm x 609.6mm） 板厚度:0.063"（1.60mm）1/16" 材质:双面包铜 FR4，1 盎斯
PC6-3
制造商:WM BERG 功能描述:
PC632-2
制造商:PEARSON 功能描述:
PC635
制造商:PICKER 制造商全称:Picker Components 功能描述:Subminiature Automotive PCB Power Relay
PC6351C-12C
制造商:PICKER 制造商全称:Picker Components 功能描述:Subminiature Automotive PCB Power Relay